Wednesday, May 25, 2011
Baby Honu Baby Blanket
My best friend of the last 25+ years is finally having her first baby! When we were little girls I went on vacation to the Black Hills and brought her back a little carved stone turtle. She has collected turtles ever since-she even dragged a 30 pound carved wooden turtle home from Ecuador! So I thought it was fitting to make the new baby a blanket with a turtle theme. The back of the blanket is green felt with turtles on it. I used the work of author and illustrator Tammy Yee as my inspiration. The front is hand-embroidered, it took me months, but it is so beautiful! I then decided I'd have to hand quilt it, so I figured out how to do that. I probably didn't do it the correct way, but no one has ever taught me how, so this worked for me. I was even proud of myself for making my own bias tape out of turtle flannel to make the binding for the edges.
Tuesday, May 17, 2011
A new sewing box for me!
I've always wanted one of those pretty fabric covered sewing boxes to keep my thread and supplies in, and never found one that I thought matched my tastes in fabrics and colors. But then it occurred to me I could pick one up cheap at a thrift store and then recover it any way that I want. One of our regular library volunteers also volunteers at the biggest thrift store in town, so I offhandedly mentioned to her to keep an eye out for a sewing box for me. She called me back that very same day and said there was one available for $3, but it wasn't anything amazing.
I ended up going down at the end of the week and looked at the box. She was right, nothing too special.
I found a little sticker on the bottom that said "Made in Japan" and I'd be willing to bet it was done during the middle part of the last century. So, now for the fun part, DEMOLITION! I needed to take the box apart so that I could work with the "bare bones". I started by removing the salmon pink lining. There were tiny little dust bunnies all over in there...yucky. Then I removed the red plastic trim from all the sides. The lid pretty much fell apart without the trim to hold it together, so I hot glued it back into roughly its original shape.
My next step was to soften the basket a little, so I hot glued red felt all around the outside. After I finished that, I decided to tackle the lining of the box. I had an idea to use some zebra print stuff (like the handles on tote bags) to make the bottom of the box, then I thought I'd do a basket weave with the zebra-stripes and black and make an inner basket. It didn't turn out well. It ended up not being square and not matching up at the top correctly, so there were gaps down into the inside of the basket visible too, so no good. I ripped all that out and changed my game plan. I ended up going with a cute black fabric with little white birds on it. I cut a rectangle of cardboard to the size of the bottom of the basket and covered it with a layer of felt and then the fabric (tacky glued the edges to the back of the cardboard). After that I added up the sides of the rectangle (6+9+6+9) to get the length of fabric I'd need to line the sides of the box. I added 1/2 an inch for the seam allowance. I sewed the one seam and then glued a small edge to the bottom of the cardboard. It now fit inside the box and there were no gaps to lose important sewing tools down into. But because of the inner structure of the basket, I decided to add some pieces of poster-board behind the lining to give it more structure.
With the lining done, I decided to work on the lid. I knew I wanted it to look kind of puffy, so I put 2 layers of quilt batting on it and then put the fabric on top. The fabric had to be big enough to wrap completely around the edge and tuck under. To make the top edge look finished, I used a ready-made piping. For the handle of the box, I used the original handle. It was made of bamboo, and I needed it to be a little smaller than the original size, so I found a drinking glass with about the right sized opening and filled it with water. Then I put the bamboo in and manipulated it to the right place in the glass. It only had to soak for about an hour before I saw the shape change the way I wanted. I kept it in the correct shape with a twist tie and let it dry over night. To finish it off I wrapped it very tightly in ribbon that matched the red in the fabric. To attach it to the lid, I used a sturdy white ribbon and "sewed" it on. I needed to widen the needle holes to get the ribbon through so I dabbed each hole with some tacky glue for safe measure. The white ribbon is secured inside the lid to a wooden cross-piece that was part of the original basket.
To cover the outside of the box, I had some thinking to do. The shape of the box wasn't really rectangular because of the rounding on the edges. So I thought I'd try putting some more of the red piping on the corners and then coming right up to it with the black wavy-lined material. I figured the wavy lines would help draw the eyes away from any imperfections instead of pointing to them the way a regularly patterned fabric might. It was a slow process, but I figured out if I pinned down one side of the piping with sewing pins I could place the black fabric where I wanted it and nail it and the piping in place. I worked in a circle all the way around. I made sure to have some left over fabric at the bottom edge of the box so I could fold in under and nail it to the bottom of the box. Worked like a charm and left the original bottom exposed, which is okay with me. For the top edge of the box, I had extra black material from the sides, so I folded it over the edge and then folded my raw edges under. I nailed it into place with the bird fabric underneath of it to create a finished edge. It isn't perfect but it worked.
The last step in recovering the box was an inner panel to finish off the lid. I cut a piece of cardboard to come to the edges of the piping and then covered it with a layer of the bird fabric. I used tacky glue to hold it in place. I wanted a pocket in the lid to hold my scissors, so I took a piece of the cover material and sewed it to a piece of felt with some of the red piping as it's edge. Then I glued it to the cardboard like I had the bird fabric. I then nailed it into place using those tiny nails...grrrr. But I got it into place after only minimal cussing and swearing. The lid isn't exactly square, probably from me pulling it apart, so it did cause me problems with this step and then with attaching the hardware later.
The finishing touch on the box was to add hinges and a latch. I found some nice brass ones at the hardware store and only spent $2.50 on the hinges and $2.50 on the latch. The affixed with screws so were pretty easy to put in. Then I added my sewing supplies and viola!
The sewing box cost $3, I spent $7 on 3 pieces of fabric (1/2 yard each), and $5 on the hardware. Everything else I used was part of my stash of supplies. I was also able to use all the 1/4 inch nails that came with the box, although they were the bane of my existence and caused me more than a few sore fingers.
I ended up going down at the end of the week and looked at the box. She was right, nothing too special.
I found a little sticker on the bottom that said "Made in Japan" and I'd be willing to bet it was done during the middle part of the last century. So, now for the fun part, DEMOLITION! I needed to take the box apart so that I could work with the "bare bones". I started by removing the salmon pink lining. There were tiny little dust bunnies all over in there...yucky. Then I removed the red plastic trim from all the sides. The lid pretty much fell apart without the trim to hold it together, so I hot glued it back into roughly its original shape.
My next step was to soften the basket a little, so I hot glued red felt all around the outside. After I finished that, I decided to tackle the lining of the box. I had an idea to use some zebra print stuff (like the handles on tote bags) to make the bottom of the box, then I thought I'd do a basket weave with the zebra-stripes and black and make an inner basket. It didn't turn out well. It ended up not being square and not matching up at the top correctly, so there were gaps down into the inside of the basket visible too, so no good. I ripped all that out and changed my game plan. I ended up going with a cute black fabric with little white birds on it. I cut a rectangle of cardboard to the size of the bottom of the basket and covered it with a layer of felt and then the fabric (tacky glued the edges to the back of the cardboard). After that I added up the sides of the rectangle (6+9+6+9) to get the length of fabric I'd need to line the sides of the box. I added 1/2 an inch for the seam allowance. I sewed the one seam and then glued a small edge to the bottom of the cardboard. It now fit inside the box and there were no gaps to lose important sewing tools down into. But because of the inner structure of the basket, I decided to add some pieces of poster-board behind the lining to give it more structure.
With the lining done, I decided to work on the lid. I knew I wanted it to look kind of puffy, so I put 2 layers of quilt batting on it and then put the fabric on top. The fabric had to be big enough to wrap completely around the edge and tuck under. To make the top edge look finished, I used a ready-made piping. For the handle of the box, I used the original handle. It was made of bamboo, and I needed it to be a little smaller than the original size, so I found a drinking glass with about the right sized opening and filled it with water. Then I put the bamboo in and manipulated it to the right place in the glass. It only had to soak for about an hour before I saw the shape change the way I wanted. I kept it in the correct shape with a twist tie and let it dry over night. To finish it off I wrapped it very tightly in ribbon that matched the red in the fabric. To attach it to the lid, I used a sturdy white ribbon and "sewed" it on. I needed to widen the needle holes to get the ribbon through so I dabbed each hole with some tacky glue for safe measure. The white ribbon is secured inside the lid to a wooden cross-piece that was part of the original basket.
To cover the outside of the box, I had some thinking to do. The shape of the box wasn't really rectangular because of the rounding on the edges. So I thought I'd try putting some more of the red piping on the corners and then coming right up to it with the black wavy-lined material. I figured the wavy lines would help draw the eyes away from any imperfections instead of pointing to them the way a regularly patterned fabric might. It was a slow process, but I figured out if I pinned down one side of the piping with sewing pins I could place the black fabric where I wanted it and nail it and the piping in place. I worked in a circle all the way around. I made sure to have some left over fabric at the bottom edge of the box so I could fold in under and nail it to the bottom of the box. Worked like a charm and left the original bottom exposed, which is okay with me. For the top edge of the box, I had extra black material from the sides, so I folded it over the edge and then folded my raw edges under. I nailed it into place with the bird fabric underneath of it to create a finished edge. It isn't perfect but it worked.
The last step in recovering the box was an inner panel to finish off the lid. I cut a piece of cardboard to come to the edges of the piping and then covered it with a layer of the bird fabric. I used tacky glue to hold it in place. I wanted a pocket in the lid to hold my scissors, so I took a piece of the cover material and sewed it to a piece of felt with some of the red piping as it's edge. Then I glued it to the cardboard like I had the bird fabric. I then nailed it into place using those tiny nails...grrrr. But I got it into place after only minimal cussing and swearing. The lid isn't exactly square, probably from me pulling it apart, so it did cause me problems with this step and then with attaching the hardware later.
The finishing touch on the box was to add hinges and a latch. I found some nice brass ones at the hardware store and only spent $2.50 on the hinges and $2.50 on the latch. The affixed with screws so were pretty easy to put in. Then I added my sewing supplies and viola!
The sewing box cost $3, I spent $7 on 3 pieces of fabric (1/2 yard each), and $5 on the hardware. Everything else I used was part of my stash of supplies. I was also able to use all the 1/4 inch nails that came with the box, although they were the bane of my existence and caused me more than a few sore fingers.
Friday, May 6, 2011
Quoted Jeans?
I have one pair of jean capris that I wear to work on Fridays in the summer. I noticed last weekend that there was an odd brown stain high up on the left thigh...hmmm, throw them out or find an imaginative way to cover it?
I considered drawing on them with fabric markers or sewing on embroidered patches. But then I remembered the iron on letters I had bought on clearance at Wal-Mart. Are you picking up on my love of clearance items yet? So, what to do with those letters? I decided to put on a quote with short words that could be "written" down the leg of the jeans.
"Create your own life and then go out and live it."
I knew right off that I wouldn't have enough of any color to write the whole quote, so I decided to highlight the key words in glitter letters. What do you think? My husband says he won't be seen in public with me when I wear them -- we'll see about that. I like them but I am noticing that they aren't wanting to stay adhered 100%. I don't know how long the design will last, especially when I need to wash them; I'll keep you posted.
I considered drawing on them with fabric markers or sewing on embroidered patches. But then I remembered the iron on letters I had bought on clearance at Wal-Mart. Are you picking up on my love of clearance items yet? So, what to do with those letters? I decided to put on a quote with short words that could be "written" down the leg of the jeans.
"Create your own life and then go out and live it."
I knew right off that I wouldn't have enough of any color to write the whole quote, so I decided to highlight the key words in glitter letters. What do you think? My husband says he won't be seen in public with me when I wear them -- we'll see about that. I like them but I am noticing that they aren't wanting to stay adhered 100%. I don't know how long the design will last, especially when I need to wash them; I'll keep you posted.
Sunday, May 1, 2011
The Quest Continues!
After a week with my customized purse, I decided that the chain for the charms needed to be better anchored. So as you can see in the picture, I used heavy-duty jump rings to attach it more firmly. I like it better this way. I've gotten more than a few compliments on it.
I have been thinking that I'd like some extra sparkle on the purse but I didn't know how to add it. I was at Wal-Mart the other day and I found an iron-on rhinestone skull on clearance for $1.00. So for that price I figured I could experiment. The directions said to pre-iron the fabric to heat it up. I did that with the leather and discovered that it really holds the heat. It took me quite awhile to get it where I wanted it and some of the little rhinestones had to be moved around (needle-nose pliers), but I got it onto the purse with it's sticky cover film adhered to the leather. Then I couldn't iron it from the backside as the directions called for, so I doubled a thin wash cloth and ironed it onto the leather. I probably ironed it longer than necessary, but when I would peel the film back part of it always came back up. Finally I gave up and thought I'd let it sit until the leather cooled. When I did, the whole design was adhered to the purse. I am thinking the leather held the heat and kept the glue from setting very quickly. It isn't perfect but it's pretty much what I wanted, I keep asking myself though, is it possible to paint designs on leather?
I have been thinking that I'd like some extra sparkle on the purse but I didn't know how to add it. I was at Wal-Mart the other day and I found an iron-on rhinestone skull on clearance for $1.00. So for that price I figured I could experiment. The directions said to pre-iron the fabric to heat it up. I did that with the leather and discovered that it really holds the heat. It took me quite awhile to get it where I wanted it and some of the little rhinestones had to be moved around (needle-nose pliers), but I got it onto the purse with it's sticky cover film adhered to the leather. Then I couldn't iron it from the backside as the directions called for, so I doubled a thin wash cloth and ironed it onto the leather. I probably ironed it longer than necessary, but when I would peel the film back part of it always came back up. Finally I gave up and thought I'd let it sit until the leather cooled. When I did, the whole design was adhered to the purse. I am thinking the leather held the heat and kept the glue from setting very quickly. It isn't perfect but it's pretty much what I wanted, I keep asking myself though, is it possible to paint designs on leather?
Subscribe to:
Posts (Atom)