DIY Jewelry Organizer

Lately I've been noticing what a big mess my dressing table seems to be. I have a nice jewelry box where I keep my expensive jewelry, a store-bought organizer for my costume jewelry and I keep my bracelets on vases. But it looks cluttered. And tacky. And I wasn't overly thrilled with the store-bought organizer. What to do?

Well the obvious solution is DIY!!! So after a few fails (and I mean epic fails that basically ruined the store-bought organizer) I decided to hit the thrift stores and find a sturdy shelf that could hold my necklaces, earrings, dangling earrings, rings and bracelets. Not as easy as it sounds, but for $4.99 I found this:

It isn't gorgeous, but it has the bare bones of something useful. Since the brackets on the bottom shelf were broken, I took the shelf apart and removed all the brackets. Then I decided to move the bottom shelf down (there were already holes drilled where I think it might have attached to a dresser or something.) Then I broke out the Clorox wipes and cleaned it up.

Oh, and here is Jack demonstrating that the shelves are placed approximately sausage-sized-cat apart.

See? Better already.
My first approach at painting the shelf was a black and white motif with women's silhouette's...my husband wasn't too thrilled with that. And before you ask, the organizer is going into OUR bedroom so I guess HE should get A SMALL bit of say in how it looks. He's more conservative than me, prefers neutrals and would be happier if I only wore small unobtrusive jewelry. Yeah, trying to please him only goes so far.
I went down to the storage room and found an old can of latex paint. It's satin finish, which I like, and a nice pale brown. My original plan was to do the pale brown base coat, use lace as a stencil and spray paint a dark brown over the lace. Would have been gorgeous...but not for $7.97 a yard for lace. Never one to pass up a bargain, I noticed that sheets of duct tape were on clearance. I figured, I can print on the duct tape (right 'cause anything will go through my printer,) and then cut the shapes out, use them as stencils with the spray paint and peel them off.

All I'd need to do was whip out my really cool rotating finger knife and cut out some butterflies.

Flaw #1 The printer would absolutely not feed the duct tape sheet through.
Flaw #2 The duct tape was hard to cut through the backing paper, and as a result, not all the butterflies came out pretty.
Flaw #3 My carpal tunnel wasn't feeling the whole carve 3 sheets of duct tape with extreme pressure on the blade to get all the way through.

So I just traced over the butterflies I had printed on regular paper onto the backing paper side of the duct tape sheet. There isn't any ink transfer but you get the impression to work with. I whipped out my scissors and cut out as many as I could get in various sizes - I ended up just using 2 sheets. All that was left was to apply them in a pleasing design, spray paint over them and then peel them off.

Flaw #1 When you put duct tape shapes onto latex paint and then try to peel it off, it takes the paint with it.

Now I have something I kind of like. I can scrap the whole spray-paint idea (it's cold and windy out anyway) and just leave it pale brown with the shock of neon pink butterflies scattered over it. It appeals to my need for color and hopefully it will appeal to his belief that it has to "fit in" with the rest of the bedroom.

But I'll have to leave the story off for now. I have decided to use 3 vintage coke bottles to keep my bracelets on, probably hot glued to the shelf...and I have a rough idea for my dangling earrings and necklaces...but so far no real victories in coming up with a DIY earring holder for post earrings. Oh and I want to make one of these for my rings, but I don't have a pair of heels to do it with just yet.

TO BE CONTINUED...

More Zipper Bracelets!

This year 2 of my very good friends graduated from high school. "J" works with me at the library, and is kind of a punky style girl, she loves a lot of the same types of books as me and is generally pretty cool. For her, I decided on a one of a kind zipper bracelet:




"J"s bracelet is 2 zippers. I started with the grey one, sewing on the hooks and loops by hand. The loops hold the ball chain in place and it is a little longer than the bracelet, so it hangs free in one spot. The hooks hold the ribbon in place (I pinched them closed with pliers after sewing them on and getting the ribbon in place.) I decided it would be fun to add a second zipper and I left this one closed, sewing it to the grey zipper so they would have even ends. I then finished the bracelet off with snaps - I love the snap setter I got at Goodwill!

"M"s mom works with me at the library and "M" is a super-cool artistic photographer. She is spunky, fun and sweet. I wasn't sure what to do for her, I knew her favorite colors were purple and teal, but I didn't have any materials in those colors that inspired me. I toyed with a rainbow bracelet idea for awhile, but nothing seemed right. Then it occurred to me that I had zippers in my collection that had come from "M"s grandmother - "M"s mom shared left over craft supplies with me when they distributed her mother's belongings. So I decided to make "M" a bracelet with zippers that belonged to her grandma. I hope she likes the sentimentality of it. Her bracelet was inspired by The DIY Collection.

I took 3 long zippers, they weren't exactly the same length, and then separated each of them into 2 pieces. I popped the red and white zipper pulls off but the black one wouldn't come off easily, so I left it. I layered half of the red with half of the white, pinned them together and sewed them by hand. This could have been done with a machine - I just decided to create this bracelet by hand like I did "J"s. After I finished the red and white, I sewed the black to the white. The next step was to find a can in the pantry that would work as a size-guide. I wanted one that would create a bracelet big enough to easily slip over my hand, I tried 3 or 4 before I got the size I wanted. The zippers were then wound around the can in repeating layers and pinned. I could then slip it off the can and sew it together. The most hidden stitches I could find for this part of the sewing was to use red thread and add a stitch between each tooth on the red zipper. Very secure but hard to see.

Now how to finish it off? I decided to make some zipper flowers like the ones on Ucreate. But hot glue is messy and that didn't work for me (this time, I will triumph eventually!) So instead I went with a swirl like this:





And the finishing touches? Rhinestones from vintage jewelry. I think she'll love it!